Blasting Supplies

Model: PBURN
Availability: In stock
Availability: In stock
Plastic burnisher: a hand-held, plastic tool used to bind the photomask to the substrate surface ..
$10.00
Model: SC120
Availability: In stock
Availability: In stock
Silicon carbide: is preferred for flat lapping of materials such as glass, crystal, metals and ce..
$115.00
Model: TAPE
Availability: In stock
Availability: In stock
Sandblasting Vinyl Mask PVC tape: this ribbed vinyl tape is used to protect areas of the substrat..
$5.50
Model: SC150
Availability: In stock
Availability: In stock
Silicon carbide: is preferred for flat lapping of materials such as glass, crystal, metals and ce..
$115.00
Model: STFP
Availability: In stock
Availability: In stock
Standard foot pedal: this foot pedal was made for our 100lb. Portable Pressure Pot. Easy to conne..
$125.00
Model: AO220
Availability: In stock
Availability: In stock
Aluminum oxide sandblasting abrasive: a sand-like material ultra fine in nature used as a general..
$100.12
Model: AO120
Availability: In stock
Availability: In stock
Aluminum oxide sandblasting abrasive; sand-like material coarse in nature and is used as a genera..
$69.25
Model: AO150
Availability: In stock
Availability: In stock
Aluminum oxide Sandblasting Abrasive: a sand-like material used as a general blasting media for m..
$70.88
Model: CLEMCLIM
Availability: In stock
Availability: In stock
Clemco climate tube: The Clemco Climate Control Tube allows the blast operator to cool or warm th..
$250.00
Model: CLEMCOOL
Availability: In stock
Availability: In stock
Cool air tube: allows the blast operator to cool the incoming compressed air to a Clemco high-pre..
$183.00
Model: CLEMFILTER
Availability: In stock
Availability: In stock
Clemco air filters: in-line air filters remove moisture, oil, and dirt particles from compressed ..
$51.25
Model: CLEMHOOD
Availability: In stock
Availability: In stock
Clemco Supplied-Air Respirator / Air Fed Hood: the Apollo 600 air fed hood provides a continuous ..
$925.00
Model: CLEMMINER
Availability: In stock
Availability: In stock
Inner lens: these lenses are an important part of the respirator assembly and are for the interio..
$14.50
Model: CLEMMOUTER
Availability: In stock
Availability: In stock
Outer lens: these lenses can prolong the inner lens life and are for the exterior of the air fed ..
$18.50
Model: NZ16
Availability: In stock
Availability: In stock
Carbide nozzle: made from tungsten carbide, the orifice is 1/16 in diameter and is great for intr..
$36.50 $32.00
Model: NZ32
Availability: In stock
Availability: In stock
Carbide nozzle: made from tungsten carbide, the orifice is 3/32 in diameter and is great for mult..
$35.50 $30.00
Model: NZ8
Availability: In stock
Availability: In stock
Carbide nozzle: made from tungsten carbide, the orifice is 1/8 in diameter and is great for large..
$36.50 $32.00
Model: NZHLD
Availability: In stock
Availability: In stock
Brass nozzle holder: a brass fitting that houses your nozzle tip and is easily connected to the e..
$11.50 $9.00
Model: ROC32
Availability: In stock
Availability: In stock
ROC nozzle: made from advanced durable composite material, this orifice is 3/32 in diameter. The ..
$165.00
Model: ROC8
Availability: In stock
Availability: In stock
ROC nozzle: made from advanced durable composite material, this orifice is 1/8 in diameter. The R..
$165.00
Model: FPRS
Availability: In stock
Availability: In stock
Standard foot pedal with short hoses: this standard feature on our 1924 and the 2034VXA Sandcarvi..
$125.00
Model: FSV
Availability: In stock
Availability: In stock
Foot Switch Valve: Provides longer machine performance, with lower maintenance, optimizes air &am..
$285.00
Model: FSVKIT
Availability: In stock
Availability: In stock
Foot Switch Valve Kit: this Rubber Tube Sleeve is a replacement wear item for the Foot Switch Val..
$70.00
Model: HDACT
Availability: In stock
Availability: In stock
Heavy duty actuator: this actuator is a replacement part that provides function to the heavy duty..
$69.50
Model: HDFP
Availability: In stock
Availability: In stock
Heavy duty foot pedal: equipped for low or high production performance, this heavy duty foot peda..
$175.00
Model: HDFP2034
Availability: In stock
Availability: In stock
Heavy duty foot pedal: equipped for low or high production performance, this heavy duty foot peda..
$175.00
Model: HDHBLK
Availability: In stock
Availability: In stock
Heavy duty black engraving hose: made specifically for sandcarving this high quality black braide..
$140.00
Model: 1/2NPT
Availability: In stock
Availability: In stock
1/2" Hose Fitting: this metal fitting is a replacement wear item and connects to the footswitch v..
$18.00
Model: 1/4NPT
Availability: In stock
Availability: In stock
1/4" Hose Fitting: this metal fitting is a replacement wear item and connects to the brass nozzle..
$14.00
Model: LITHOBLK
Availability: Out Of Stock
Availability: Out Of Stock
Lithichrome Aerosol BLACK: convenient for quick paint fill projects or when an air gun is not ava..
$14.20
Model: LITHOWH
Availability: Out Of Stock
Availability: Out Of Stock
Lithichrome Aerosol WHITE: convenient for quick paint fill projects or when an air gun is not ava..
$14.20
Model: LITHCO
Availability: Out Of Stock
Availability: Out Of Stock
Lithichrome: used as color fill to engravings most commonly done on all colors of granite. Lithco..
$146.23
Model: LITHOBLKG
Availability: Out Of Stock
Availability: Out Of Stock
Lithichrome Black Shadow: enhances all types of stone by providing contrast in the lettering and ..
$81.75
Model: LITHOWHG
Availability: Out Of Stock
Availability: Out Of Stock
Lithichrome Hilite: used as color fill to engravings most commonly done on all colors of granite...
$81.75
Showing 1 to 34 of 34 (1 Pages)

































