| Super Duty Goodyear® Blasting Hose | |
|
|
This is no ordinary
blasting hose! This Super Duty hose lasts 10 times longer than our former
red hose. Designed by Goodyear®
, this specially braided hose made up of thousands of strands of rubber
insures outstanding performance for the type of sandcarving you do. $125.00 |
| Tungsten Carbide Nozzle | |
|
|
Tungsten Carbide Nozzles
Carbide Nozzle 3/32”
$27.50 |
| Brass Nozzle Holder | |
|
|
Brass nozzle holder
attaches to Rayzist® Super Duty hoses.
|
| Diaphram Gasket | |
|
|
How do you know if you
need one? If you take your foot off the footswitch pedal and there is still a faint stream of sand and air, it's time for a new one. $15.00 (3 pack) |
| Dust Collector Bags | |
|
|
For
1932 & 2336 models
only $15.50 each |
| Footswitch, Bottom Valve | |
|
|
Neglecting to replace the
Diaphram Gasket in a timely manner can result in wear to the Bottom
Footswitch Valve. $45.00 |
| Footswitch, Valve Upgrade | |
|
|
If you haven't replaced the Bottom Footswitch Valve since
1998, you may require this Footswitch Valve Upgrade. $95.00 |
| Standard Foot Pedal with Hoses | |
|
|
This pedal is
included with all our Sandcarving Systems and 100lb Pressure Pots. Great
for light to moderate use. $101.50
Note: item included shown in color only |
| Heavy Duty Foot Pedal with Hoses | |
|
|
Lasts
approximately 10 times longer than the Standard Foot Pedal. Recommended
for heavy production use. $144.00
|
| Abrasive Sifting Ring | |
|
|
For use with the 100lb
Portable Pressure Pot (standard with 1932 & 2236 models) $40.25 |
 LetraLite™ Cylinder |
|
|
|
Finding
similar stubborn spots when washing out different sheets of film? It could
be the result of a scratched cylinder. Recommend replacement every 2 years
or when cylinder gains a yellow hue... Definitely replace if scratched! $85.75 |
|
LetraLite™ Bulb |
|
|
|
Replace every
700 hours of use. The light may start to flicker before burning out. $19.25 |
|
LetraLite™ Blanket |
|
|
|
A loose blanket will produce an inconsistent washout.
Your blanket should have no more than 1/2" - 1" worth of tension to clip
to the cylinder. Replace if edges are worn or loose. $27.00 |
|
LetraLite™ Ballast |
|
|
|
If the bulb has been changed and is not flickering or if the unit
does not come on after 30-45 seconds, you may need to replace the ballast. $16.50 |
|
LetraLite™ Starter |
|
|
|
If the light is not coming on
after 3-6 seconds and seems to flicker for more then 10-15 seconds,
replace your starter. $2.25 |
|
LetraLite™ Timer
|
|
|
|
If the timer is getting stuck and you're constantly
over-exposing the film, replace the timer. $38.75 |
| Air & Water Pressure Regulator Assembly | |
|
|
Includes
Air Flow Valve with attached hose, Pressure
Regulator, Water Separator, Tee Valve
and Air Inlet Valve. Minor
assembly required. $220.00 |
|
Air-Fed
Hood and Respirator |
|
|
|
For on-site
blasting, over-sized projects or when a cabinet is unavailable.
$750.00 |
