There are 2 messages in this issue.

Topics in today's digest:

      1. reproducing photos on stone and glass
           From: "Dieter Hager" <WolfDHager@xxxxxxxxxxxx.xxxx
      2. Re: reproducing photos on stone and glass
           From: steve.pinn@xxxxxxxx.xxxxxxxxxxxxxxxxx)


_______________________________________________________________________________
_______________________________________________________________________________

Message: 1
   Date: Fri, 9 Jul 1999 23:51:51 +0100
   From: "Dieter Hager" <WolfDHager@xxxxxxxxxxxx.xxxx
Subject: reproducing photos on stone and glass

Hi there,

I would like to reproduce portraits on stone and glass.

Can anyone please shed light on the proceedure.

Thanks in advance, 

Dieter


_______________________________________________________________________________
_______________________________________________________________________________

Message: 2
   Date: Sat, 10 Jul 1999 00:58:41 GMT
   From: steve.pinn@xxxxxxxx.xxxxxxxxxxxxxxxxx)
Subject: Re: reproducing photos on stone and glass

Dieter, I have done this on several occassions.  I scan the photo into
Corel Photopaint.  I then print a negative image using 75 mesh
halftone screen onto an acetate film.

I then use this film to create a photomask, understand that the small
dots of the halftone will be very fragile when blasting.  I blast very
lightly the fill in with gold wax.

Steve



On Fri, 9 Jul 1999 23:51:51 +0100, you wrote:

>From: "Dieter Hager" <WolfDHager@infocanarias.com>
>
>Hi there,
>
>I would like to reproduce portraits on stone and glass.
>
>Can anyone please shed light on the proceedure.
>
>Thanks in advance, 
>
>Dieter