Inside Work Space: 34"w x 22"d x 24"h
Outside Dimensions: 39"w x 33"d x 78 1/2"h
Shipping Weight: 560lbs.
The standard unit is 110 volt, 15 amp (220v 50h Power Conversion Upgrade Available)
Exclusive ergonomic height adjustment design, built to comfortably fit users in either standing or sitting positions.
Vortex technology automatically separates the usable abrasive from the unusable abrasive, maximizing the recycle rate of your blasting media.
During blasting, Vortex sends the abrasive into an airwash, which automatically filters the finest dust particles and debris from the usable abrasive. The dust and debris are directed into the HEPA filtration system, ultimately ending up in the disposable liner; the usable abrasive is redirected back into your system for reuse.
This 50 lb., ASME-certified pressure vessel houses the abrasive. It automatically filters out debris to prevent clogging. Our exclusive 45 degree angle design allows for a more consistent sandflow.
Compressed Air Requirements: 5.5 CFM (or greater) at 90 psi to facilitate blasting pressures of 30 psi using 3/32" nozzle.
This exclusive, built-on dust filtration system incorporates a mechanical shaker to protect you from exposure to airborne dust while you are sandcarving, and even during maintenance dust removal. The dust filtration system efficiently separates the worn abrasive using eleven woven polyester, HEPA filtration Teflon bags. The unusable abrasive is then emptied into the clear disposable liner.
The Premium Dust Collector incorporates 15 sq. ft. of efficient HEPA filtration and separation. Built-in HEPA filtration allows for separation and capture of 99.7 of the dust particles as you are sandcarving. As a result, your sandcarving work area remains cleaner at all times.
This accessible, removable clear liner stores your unusable abrasive until you are ready to throw it out. The clear liner is attached to the lower chamber of the Premium Dust Filtration System; because the bag is transparent, you can easily see when it needs to be emptied.
1/3 HP 3,450 rpm motor with die cast aluminum housing and radial blades.
740 CFM interior airflow suction.
The cabinet design follows the contours of your natural position while sandcarving, which allows you to work comfortably and more productively.
The system is built to last for years, with total seam-welded, 14 & 16 gauge steel construction and a epoxy powder-coated finish. The epoxy powder-coated finish resists rust as well as chips, scratches and wears better than other types of finishes.
The large gloveless sleeves are made of a lightweight polyurethane, for easy mobility and handling of your products while sandcarving.
The padded arm rests prevent stress to your forearms and provide added comfort while sandcarving.
The dual recessed halogen lighting provides the brightest lit sandcarving workspace on the market.
The oversized laminated safety glass provides superior visibility while sandcarving. The oversized viewing window can easily be replaced.
The double-door entry provides easy access from both sides of the cabinet, and a large unrestricted space for moving the items in and out.
Locking wheels give you the flexibility to move your system when required.
This new footswitch valve provides longer performance and is very low maintenance in comparison to the former footswitch valve. It also optimizes air and sand flow to your hoses.
The 10 ft. heavy duty hose is flexible and provides adequate sand flow and longer blasting usage.
The blasting hose can be used from the right or left side, so the system is as convenient for left-handed sandcarvers as it is for right-handed sandcarvers.
The durable 3/32-inch carbide nozzle is versatile and easy to use for any sandcarving project. It comes with an adapter and O-ring.
This unit regulates the amount of air pressure and sand flow (PSI) being sent to your blasting hose/nozzle and efficiently separates the water content. We have combined the two functions into one unit to minimize space. Standard features include an auto-relieving moisture drain to remove water drops and oil from compressed air, a push-down locking adjustment knob to change pressure settings, pressure gauge, liquid level indicator and manual relieving valve.
The Exclusive Max Flow Air Curtain directs air across your viewing window to remove dust and ensure maximum visibility while sandcarving. This process is made possible by a vent above the viewing window. Also, helps prevent dust and overspray to your viewing window.
Rayzist guarantees that our sandcarving systems are built to last.
Participation in the Partner Program includes special pricing for film as well as a contract between Rayzist and customer.
Note: Shipments may take 1-3 business days to process unless otherwise specified.