The "Original Blue" user friendly SR2000™ is a high resolution photo resist enabling
carvers to achieve supreme detail and
a deeper etch among
competing films. SR2000™ provides an ideal system for creating
fine quality engraving on endless varieties of glass, wood, stone,
ceramic, granite, marble, and soft metals. From exposing to
blasting, carvers are able to get it done faster and more
efficiently then ever before.
Low Cost: Prices typically range from 5-7 cents per square
inch.
Exposure Time: 30 seconds, 3-6 mil.
Room Lighting: No darkroom or yellow lighting needed. SR2000™
photo resist film can be handled in white fluorescent lighting for
approximately ten minutes without effecting the performance of the
film. Avoid any room or area that has direct or indirect UV light
such open windows or doors. Sun light will expose the film in a
matter of seconds.
Fast Development: From wash out to dry time, SR2000™ will
cut your production time significantly. Standard washout times begin
at 45-90 seconds, depending on the mil.
Patented NON-STICK Surface: Special treatment eliminates
"sticky film" problems conducive to humid environments. No
struggling with exposure, application, or clean up. All mils air dry
within 30-60 minutes. Save money with one film
for any environment, any time of year.
Durability: SR2000™ has unmatched blast resilient
properties superior to any photo resist in the industry. Blast high
resolution designs without the worry of pin hole blast through or
carrier release bubbling.
High Productivity: Rayzist® photo resists apply and clean up
faster and easier, saving up to 1/3 of total labor* over any other
photo resist material.
Mils: SR2000™ comes in 3-6 & 9 mil thicknesses.
Requirements: To use SR2000™ photo resist film, you will
need a UV light source, film tool, pressurized washout unit (such
as a Rayzist® Hand Washer or Automatic Washout Unit).
Shelf Life: Conservatively, 14 months at room temperature.
Material Chosen and Why: SR2000™ photo resist film
satisfies all levels of production with extremely fast exposure
times, quick wash out, easy application, superior durability, finer
detail, unmatched depth and fast clean up... without the need for
special yellow lighting, resist removers, or any other added
expense.
* As reported in the Sandcarving
Quarterly, Volume 1, Number 2 - 1997
Go
to the Online